Avmap APRS Instrukcja Użytkownika Pobierz pdf (Strona 31)

Making it all work!

a. Make sure both the Kenwood TM-D700 and AvMap

Geosat 6 APRS are turned OFF!

b. Connect the four pole 2.5mm communication

cable end to serial input of the Geosat 6 APRS and the

three pole 2.5 mm end to the D700’s GPS receptacle.

IMPORTANT! These are easily reversed and hooked

up backwards; also when connecting to the Geosat 5

make sure you plug into the serial input, not the ANT

receptacle which is right next to it and the same size!

Screen # Item Select/Enter

3-1 CALL SIGN {your call sign}

3-2 GPS UNIT- NEMA FORMAT {NEMA96}

3-3 WAYPOINT {9 DIGITS NEMA}

3-5 POS AMBIGUITY {OFF}

3-7 POS LIMIT {OFF}

3-B PACKET PATH {WIDE1-1,WIDE2-2}

3-C PACKET TRANSMIT METHOD {AUTO}

3-D PACKET TRANSFER INTERVAL

{3 MIN.} NOTE: Smaller times (<5min) are for mobile units while

stationary stations will use longer times (~10 min. and up)

3-J PACKET TRANSFER RATE {1200 bps}

APRS functions

AvMap - 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Brak uwag

Avmap APRS Instrukcja Użytkownika Strona 31