Avmap APRS Instrukcja Użytkownika Pobierz pdf (Strona 24)

Menu Number Description Setting

3H2 Total Hops 2 (during setup)

3J0 TX Off

3K0 Digipeat (MyCall) Off

3T0 RX Beep All (during setup)

3T1 TX Beep (Beacon) On (during setup)

Making it all work!

The Kenwood TH-D72A/E is now ready to interface

with the Geosat 6 APRS.

Now that the conguration is complete, it’s time to

see if it will work.

1. Turn off the Geosat 6 APRS and the TH-D72A/E.

2. Connect the two units using the data cable pro-

vided with your AvMap Geosat 6 APRS. Plug the four-

conductor plug, with three black insulating rings,

into the I/O port on the Geosat 6 APRS. This is the

top jack on the right side of the Geosat 6 APRS. Make

sure the plug is rmly seated in the jack. Open the

COM cover on the TH-D72A/E and plug the three-con-

ductor plug (two black insulating rings) into the COM

port. Again, make sure it is rmly seated. A common

problem with operation failure is not having the plugs

rmly inserted in the units, or having the connections

reversed. Double check your connections.

APRS Functions

24 - AvMap

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Brak uwag

Avmap APRS Instrukcja Użytkownika Strona 24